HBFPV DX40 40mm EVA Ducted 2-3S HD FPV Racing Drone Caddx Baby Turtle F4 OSD 12A 0803 Motor

HBFPV DX40 40mm EVA Ducted 2-3S HD FPV Racing Drone Caddx Baby Turtle F4 OSD 12A 0803 Motor

Specification:

Brand name: HBFPV

Item name: HBFPV DX40 40mm EVA Ducted 2-3S HD FPV Racing Drone Caddx Baby Turtle F4 OSD 12A 0803 Motor

Drone F4 OSD 12A 0803 Motor

Power Supply: 2-3S LiPo

Carbon Fiber Plate: 1.5mm+1.0mm

Ducts: Nylon Plastic

Wheelbase: 92mm

Weight: 65g (without battery)

Recommend BAT: GNB 2S 550mAh / GNB 3S 450mAh

Estimated Flight Time: 4-7 minutes

Receiver Options:

FrSky D8 / D16-EU-LBT / D16-NonEU, DSMX, FS-RX2A, for Futaba-SFHSS

Package Size: 132x132x33 mm

Package Total Weight: 166g

Flight Controller & ESC	Model: HBFPV AF412 Lite MCU: STM32F411 IMU: MPU6000 gyroscope/accelerometer (SPI) OSD: BetaFlight OSD w/ AT7456E chip Barometer: N/A BEC Output: 5V@2A Integrated LC Filter Include Buzzer pad Firmware target: MATEKF411 ESC MCU: BB21F16G Continuous current: 12A(13A for 3 seconds) Input: 2-4S LiPo Supports Dshot600, Proshot, Oneshot125, Multishot Current meter: 210 Target: G_H_30 Size: 28.5×28.5mm board Installing Hole: 25.5×25.5mm, M2/M3 Weight: 4.7g
Motor	Model: SE0803 KV: 12000KV(2-3S) Motor shaft diameter: 1.0mm Motor shaft length: 3mm Motor mounting hole: M1.4×3, hole distance 6.6mm Plug specifications: JST SH1.25 3-Pin plug Motor wire specification: 30AWG silicone wire, wire length 5cm Support battery: 2-3s LiPo Product weight: 2.45g
Propeller	Gemfan GF1635 3-Blade 40mm 1.6 inch Propeller Transparent Red Quantity: 2 CW & 2 CCW
VTX	Output Power: PIT-mode / 25mW / 100mW / 200mW / 400mW Switchable Control Mode: BF OSD Control (RX) / Button (IRC Tramp) Input Voltage: DC 5V Output Characteristic: PIT———0dBm——70mA 25mW—–14dBm—–150mA 100mW—-20dBm—–210mA 200mW—-23dBm—–280mA 400mW—-26dBm—–360mA Antenna: IPEX Weight: 1.2-1.5g
Camera	Brand name: Caddx Model: Baby Turtle Version: Whoop Version Image sensor: 1/2.7 inch -CMOS sensor Resolution: 800TVL Recording: 1080P/60fps, 1080P/30fps Lens: 1.8mm lens FPC FOV/Recording FOV: 170 TV system: NTSC/PAL changeable with OSD Video file format: MP4 Aspect ration: 16:9/4:3 Changeable with OSD Max Micro SD card supported: 64G Audio: Support Illumination: 0.01Lux DNR: 3DNR WDR: YES Fly OSD: YES Color: Black/White Power input: 5V-20V Power current: 12V/160MA Net weight: 9g Dimension: 14×14 & 19x19mm Dimension of mounting holes: 20x20mm (Normal Version)/ 25x25mm (Whoop Version)

User Guide

FC & ESC & VTX Manual: http://www.hbfpv.com/164/

IRC Tramp / Smart Audio OSD Manual: http://www.hbfpv.com/96/

Receiver Binding Manual: http://www.hbfpv.com/203/

Camera Manual: https://www.hbfpv.com/248/

Package Included:

PNP (Without RX) Package Listing:

1x DX40 v1 Ducted Drone (Assembled & Tested)

1x Micro Screw Driver

1x Prop Remover

1x User Card

BNF (With RX) Package Listing:

1x DX40 v1 Ducted Drone (Assembled & Tested)

1x Receiver Pack

1x Micro Screw Driver

1x Prop Remover

1x User Card

Weight	N/A

Shipping information Please allow 7 - 15 business days for your order to arrive. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!

Our policy lasts 14 days. If 14 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.